1689/7 - MICROPRO Straightener/Feeder
MICROPRO solution 2 in 1 : saving floor from 40 to 50% !
- 7 x 100 mm dia straightening rolls
- The 3 upper straightening rolls are mounted on a cradle, whose depth and tilt are adjustable through 2 independent gear motors; digital display of the cradle position
- 1 pair of 140 mm dia feeding rolls
- Hydraulic POR: hydraulic release of the feeding rolls + sheet release for piloting through hydraulic opening of the feeding rolls and setting of motor torque to 0
- All straightening rolls are case-hardened (60 Rck) and ground
- RCS: the feeding rolls are sandblasted and hard chrome plated (70 Rck)
- All rolls are supported by hardened rollers to avoid deflection and get better straightening quality
- All rolls are cardan-driven from a multiple outlet reduction gear
- Motorisation through brushless motor and reduction gear free from play
- GRS: inlet strip guide made up of 2 x 80 mm dia hardened vertical rollers, symmetrically adjustable, with width display
- GCM: centralized lubrication unit with manual pump
- Inlet horizontal rolls for easy strip introduction
- Outlet basket made up of horizontal sheet holding rolls
- Welded base
- CRM/T: extra pitch measurement through sensor directly placed on the sheet and supervision of the slipping value between strip and rolls
» Download the sheet
» {Produit.dlAutres}
» Select support
Back to product list