INDUSTRIES
Several industries are concerned by our know-how :
- lighting
- household appliances,
- heating and air conditioning
- metallic furniture,
- racking and shelving
- frames, claddings and accessories for bulding
- electrical cabinets and fixtures
- car industry
Metal furniture and shelves
LINAPUNCH ® MC-E - Fully electric NC punching machine
After 3 years of research and development, DIMECO now disclose its new servo-electric LINAPUNCH® MC-E which offers more productivity and flexibili...
know more
Shelving uprights manufacturing line
SHELVING UPRIGHTS MANUFACTURING LINE : the challenge, productivity and flexibility Our french customer has been market leader in industrial racking ...
know more
Production of lockers
For punching all parts of its locker and shelving panel production range, a Slovak manufacturer has selected the dual LINAPUNCH system. It allows cont...
know more
Office cabinets
The DIMECO ALIPRESSE CHALLENGE Producing the seven pieces which make up an office cabinet one after another in less than154 seconds, that ...
know more
Office furniture drawers
Drawer blanks are punched on a FLEXILINE using a YT 24 G LINAPUNCH unit. This system is detailed to office furniture having a capacity of 1000 mm in w...
know more
Metallic shelves and bottom pannels
Production of punched shelves from 3 ton coils, width 300 to 800 mm. Production of bottom panels including side hook shapes stamping fr...
know more
Shelves for supermarket 2
The production cycle may be changed quickly by just rotating the roll-forming heads...
know more
Shelves for supermarket
This line produces all shelves and back panels for supermarket from prepainted metal sheets....
know more
Storage racks
From normal or HSLA sheet metal coils, this line produces the columns of storage racks with a 25 m/min output...
know more
Shelves and perforated angle bars
For production of shelves including only the notching operations, we manufacture punching station including : 2 notching units facing to each&nbs...
know more
Metalic furnitures 1
Quick die change without any manual task The line manufactures the main parts included in a quick built-up supermarket shelve system i.e. shelf and pe...
know more
Metallic furnitures 2
Flexibility, speed and quality Advantages of this solution : production capacity : up to 20 parts/min reduced tool change over finished ...
know more
Metallic shelves 1
FLEXIPRESS PERFORATING LINE Notched and perforated blanks for the production of shelves An incomparable flexibility/productivity ratio. http://www...
know more
Storage racks
FLEXIPRESS® PUNCHING + ROLLFORMING - Manufacturing of uprights, beams and brackets on a single line. - Parts length up to 5 mm, thickness up to 3...
know more
Shelves and uprights
PUNCHING + ROLLFORMING COMPACT LINE - Output up to 30 pieces/mn. - Overall line length : 14 m. ADVANTAGES OF THE SOLUTION - Very cost effective li...
know more
Building industry
Metal floor and scaffolding plates
Scaffolding plates for a customer in Poland. The line is composed by a 80-tons Flexipress and a 25 stations rollforming machine. ...
know more
LINAPUNCH HEAVY DUTY + ROLLFORMING C, Z, 'Omega' purlins, structural beams
x, y 2 axis N.C. punching; Punching force : 10, 20 tons 60-ton hydraulic extra unit. Cassettes rollforming machine. LINE PERFORMANCES From 5-ton coil...
know more
Garage doors
ECONOMICAL PUNCHING LINE TO PRODUCE COMPONENTS OF GARAGE DOORS It's a r eal hydraulic punching machine with numerical control enabling a safe use of ...
know more
Extra long C purlins
C PURLINS OF 26 METERS... AND OVER Single or dual LINAPUNCH is now the essential unit to punch extra long Z or C purlins and metal building framework...
know more
Z and C purlins - 2
Alternative production of 1.5 to 14 meters Z and C purlins which are entirely punched on the same line... this is the sucessful challenge of our Spani...
know more
Roof steelwork
A FLEXIPRESS for made-to-measure roof steelwork. The flexibility of this stamping line permits to produce the various components of the roof frames....
know more
Z and C purlins - 1
The multisequence method was developed and is used to punch SIGMA sections, Z and C purlins and motorway crash barriers before cutting and roll-formin...
know more
FENCES : Rollforming - Punching - Length cutting
Basic and economic concept in rollforming, punching and length cutting DIMECO offer efficient solutions thanks to compact rollforming units integrati...
know more
Advertising panel line
Punching, shearing, bending and clinching Advantages of the solution : Line output up to 4 parts per minute. 3 different operations are comb...
know more
Hydraulic punching from coil for staircase steps
Line performances : From 3 ton coils, manufacturing of thick gauge parts (up to 4 mm). Part size range : - length from 800 to 2000 mm, - width from 40...
know more
Door and window hardware 1
12th line and a large experience The ideal line to manufacture all parts in small and medium batches. www.youtube.com/watch 1 ...
know more
Ventilated claddings
FLEXIPRESS® + SERVO ROLLFORMING - “START-STOP” rollforming machine with servodrive. - Forming of triangular or trapezoidal shapes. - ...
know more
Door and window hardware 2
FLEXIPUNCH® FOR SPOOLED STRIPS - Narrow parts from 7 to 13 mm wide, up to 3000 mm long. - 2 axis programmable straightener. - Built-in strip clea...
know more
Heating
Front panels for heaters
FRONT PANELS OF UPMARKET RADIATORS Flexible line for just-in-time production of a whole range of front panels of radiators from coils. Loss of materi...
know more
Electric heaters
This FLEXILINE has been engineered to produce alternately enclosures (A) and electrical heaters (B). It includes one hydraulic punching station ...
know more
Electric heaters grates and pannels
FLEXIPRESS LINES FOR MANUFACTURING CLADDING PANELS OF WATER RADIATORS Two lines are used to manufacture both side pannels and upper grate for claddin...
know more
Heat exchangers 2
FORMING LINE FOR \"DOUBLE SKIN\" PLATES Punching of heat-exchangers : in order to process 0.05 mm thick copper film, we have optimized the architectu...
know more
Heat exchangers 1
This heat exchanger production line is the work’s result of MIB-HYDRO and ALIPRESSE, 2 companies from DIMECO. This line is able to deal with 3 ...
know more
Radiator top covers and side panels
FLEXIPRESS® - ROLLFORMING - FORMING - More than 100 different parts, from 200 to 3000 mm long, from 70 to 160 mm wide. - Aesthetic parts requirin...
know more
Lighting industry
Bodies and tops for lighting battens
BODIES AND TOPS This line has been designed for the production of parts of lighting battens in normal sheet metal or prepainted sheet metal from coil...
know more
Louvers recessed light fitting. Forming of polished mirror aluminium without any scratches
Louver forming process : during the forming operations, the part delicate face is protected by a plastic film which runs inside the tools. Interest o...
know more
Louver cross bars
FLEXILINE for the production of cross vanes. This line is meant for punching optical components made of film-protected aluminium. The tools placed&nb...
know more
Suspended surface mounted and recessed light fittings
DIMEFORM 4-side bending center for a flexible production of ceiling lamps made of prepainted sheets of variable dimensions. to the left : l...
know more
Industrial reflectors
Industrial reflectors have a high body which is folded on either sides. This necessitates a combination of roll-forming the folds at the edges and the...
know more
Low-cost light fittings
A cost-effective light fitting is built with a tray with steel or plastic end caps, one cover and a central \"V\" reflector louver can be made of one ...
know more
Waterproof light fittings
A waterproof lighting unit consists of a body in a composite material, a panel made of prepainted sheet and an injection-molded cover...
know more
Lighting rails
Light rails are usually made with the same raw material as batten light fittings. They are quite long (between 1500 and 3000 mm). Our roll-forming tec...
know more
Battens light 2 : production of body and cover in one operation
Separate production of body and cover If the design or the size of the product make it impossible to manufacture two parts simultaneously, it is nece...
know more
Batten lights 1 : production of body and cover in one operation
Simultaneous production of body and cover Production of 25 bodies and covers per minute...
know more
Louvers for lighting appliances
PUNCHING + ROBOTIZED BENDING - 0,4 mm thick mirror-finish aluminum with plastic foil. - Part length from 400 mm to 2000 mm. - Electric press-brake. -...
know more
Pit-stop flexipunch
FLEXIBLE PUNCHING LINE The « PIT STOP » concept is an improvement of the FLEXIPUNCH® flexible punching line. ...
know more
Engineered Ventilation
Profiles and frames for ventilation and air conditionning
FLEXIBLE PUNCHING AND ROLL-FORMING LINE A simple and economical solution for a fully automated production from coil to metallic profiles and frames a...
know more
Aerolics industrial ventilation
We chose the FLEXIPUNCH application (punching + stamping) for the production of miscellaneous parts because it combines both advantages of our FLEXIPR...
know more
Flexible punching & forming from coil - Smoke evacuation and day lighting systems
This FLEXIPUNCH line performs punching and forming operations for all sheet metal parts integrated in customer’s wide range of products. Advant...
know more
LINAPUNCH HEAVY DUTY + ROLLFORMING C, Z, 'Omega' purlins, structural beams
x, y 2 axis N.C. punching; Punching force : 10, 20 tons 60-ton hydraulic extra unit. Cassettes rollforming machine. LINE PERFORMANCES From 5-ton coil...
know more
Electrical cabinets and fixtures
Production of electric cabinets
FLEXIPUNCH PUNCHING LINE Flexiblity of a turret punching machine + material saving (coil) - As flexible as a CNC turret punch. - Up to 25 % savings o...
know more
Magnetic sheets for transformers
Our Spanish subsidiary has achieved and started up several punching and cutting lines for the most important manufacturers of transformers in Spain an...
know more
Loudspeakers amplifires
ADDITIONAL CORNER NOTCHING AND PUNCHING UNITS When parts are including complexe notching and punching shapes, we can provide, as an option, additiona...
know more
Power cabinets
This FLEXIBLE PUNCHING and FOLDING CENTRE enables the manufacturing of a large range of units for modular electrical boxes, from a single wide metal s...
know more
Large electric cabinets
All abilities of DIMECO GROUP have been required for this production line engineered for the manufacturing of electric cabinets of large dimensions fo...
know more
Low voltage electric cabinets
In order to reduce floor space of the line, the independant unit PUNCHING BENCH is fed with a MICROPRO straightener-feeder controlled by a MCU 8 NC wh...
know more
Power cabinets
This flexible production line meant for the Middle-Eastern market was designed for the production of power cabinets. It has a production capacity of t...
know more
Metal wire cable trays
DIMECO SPAIN has designed and built automatic bending machines to manufacture metal wire cable channels....
know more
Cable trays 2
This line is able to produce in continous flow mode up to 20 m/min from galvanized coil sheet metal....
know more
Cable trays 1
For cable rays production, punching operation is made by a high speed press and forming operation by a duplex roll-forming machine model PDE200....
know more
Electrical power connection rails
For the use in production of prefabricated electric rails, we have designed a new type of compact hydraulic punching bench....
know more
Mobile pannels for electric cabinets
Punching, stamping, forming, bending of mobile panels for electric cabinets Variable lengths : 50 to 750 mm Material : 0,8 mm thick black sheet metal...
know more
Cable trays 1
MECHANICAL PRESS + DOUBLE ROLLFORMING MACHINE - 120 ton mechanical press, 160 Spm. - Double stage roll forming machine. ADVANTAGES OF THE SOLUTION -...
know more
Electric enclosures
LINAPUNCH® + ROLLFORMING + BENDING - Production of more than 600 different types. - Max width : 1250 mm. - Line output hourly rate : 20 complete ...
know more
Household appliances
Refrigerator cabinets
To form the refrigerators cabinets for an indian manufactureer located in Chandigarh (Pendjab) from precoated blanks, we have used new...
know more
Washing machine cabinets
A LINE FOR WASHING MACHINES FROM PREPAINTED METAL SHEET This line for washing machine cabinets is installed in the Indian plants of an Indo...
know more
Precision cut-to-length line for delicate material
Shearing alumium blanks up to 800 x 3000 mm for home appliance applications for one of the biggest russian frdge manufacturer. The line outpout reac...
know more
LINAPUNCH ® MC-E - Fully electric NC punching machine
WORLD PREMIERE at TOLEXPO 2009-exhibition in Paris Booth 5A - K60 After 3 years of research and devel...
know more
Freezer doors
2 HEAD DIMEFORM® NC BENDING - Feeding of 2000 x 800 mm punched blanks. - Output : 60 pairs of doors per hour. ADVANTAGES OF THE SOLUTION - The ...
know more
Agri-business
Stainless steel sinks
Designed for a Scandinavian manufacturer of stainless steel sinks, this line produces blanks cut lengthways and notched at each end for stamping prepa...
know more
Stainless steel kitschen pannels
This production line uses stainless steel metal sheets. A reel of plastic film is placed at the entry of the straightener for the protection of the pr...
know more
New technologies (computer, servers, environment and nature...)
Production of computer work stations
LINAPUNCH : an universal punching machine This single LINAPUNCH manufactures bodies, panels and casing for computer work stations....
know more
Production line for computer racks
FLEXIPRESS NOW IT TAPS ! Production time from 24 minutes to 1.5 min : 94 % time saving. 250 tapped holes. DIMECO has fitted 7 x die tapping units ...
know more
Electro filters
High capacity punching and rollforming line (8 axis) The line is composed by following machines: - uncoiler 25 tons - straihgtener – feeder 16...
know more
Automotive industry
Automotive exhaust envelopes
This cost-effective line is well adapted to middle size exhaust factories for emerging countries for instance. It combines all the operations needed t...
know more
High speed stamping of technical washers
This line feeds apress with a specific design, it's inclina-ted up to 15° from ground. Due to this design, stamped washers directly fall down ont...
know more
Others
Advertising panel components
PUNCHING BENCH + ROLLFORMING + BENDING - ENDBEND part ends bending machine with programmable spacing. - Integrated parts clinching. - Variable part l...
know more